Saturday, April 29, 2017

PTU Tropical Babe


This tut was written April 29th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
Tube is called Tropical Drink Babe.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Tequila Sunriser by Irish Princess Designs  HERE
This kit is AWESOME, ready for your Summer, Beach fun tagging needs and more.
You can also find this kit at one of these stores HERE, HERE, HERE
Angie Tagged Me Mask 57  HERE
Check out the rest of the blog HERE

Font of Choice, I used Annabel 1

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 4, apply your mask, delete, merge group, resize larger to 110%.

Resize element 15 to 75%, paste, click inside with your magic wand, paste
paper 4, invert, delete, keep selected, mirror your middle size tube,
paste, delete, change the blend mode to Overlay, select none.

Resize your tube to 70%, paste to the right more.

Paste element 81 at the bottom below the tube, resize to 90%, take your
Pick tool, hold the shift key, take the square on one side at the top and drag down, do
the other side also until the sand is as flat as you like.

Resize element 20 to 70%, mirror., paste behind your tube layer on the right, duplicate,
mirror, resize to 85% and place on the left.

Resize element 11 to 30%, paste below the tube layer on the right.
Resize element 66 to 30%, mirror, paste on the right below the tube.

Resize element 24 to 30%, paste on the left side on the sand, then go back to
the greenery with the red flowers, duplicate twice, move behind the boxes where you
would like.
Resize element 4 to 25%, paste below the flower layer, duplicate, mirror, duplicate
a couple more times, place where you like.

Resize element 106 to 15%, paste by the boxes at the bottom, duplicate, move
to the right under the musical instrument.

Resize element 41 to 75%, paste just above the tree layer and more centered.
Resize element 124 to 15%, take your Pick tool, hold the shift key, pull the top square
down on one side, then the other side until it is as flat as you like, paste below
the flower by the boxes at the bottom.

Resize element 51 to 13%, paste on the boxes on the left.
Resize element 71 to 25%, paste at the upper right, above the umbrella layer.
Resize element 36 to 45%, paste below the tree layers on the right more.
Resize element 12 to 20%, paste on the left below the boxes layer and
move out more to the left of them, duplicate, mirror, adjust
below the musical instrument.
Resize element 125 to 10%, paste at the bottom, one in front of the boxes, duplicate,
move below the tube layer down by the shoes.
Resize element 13 to 20%, paste at the bottom on the left side of the tube.

Add any other elements that you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Thursday, April 27, 2017

PTU All Night Diner


This tut was written April 27th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Lysisange.
Tube is called "Norma"
She comes in several colors to choose from.
You need a license to use this art work. Please do not use without a license.
 You can find this art,  it is EXCLUSIVE to her store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Pinup to match by Lil Mz's Brainstorms  HERE
Trese Masks 0572  HERE
Check out the rest of the blog HERE

Font of Choice, I used
Airstream

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste pinup paper, apply your mask, delete, merge group.

Paste element 31, resize to 95%, move up some.
Paste element 32 on the sign, resize to 60%.
Resize element 15 to 50%, paste on the left hanging from
the arrow, erase the right side string that is on the sign.
Resize element 25 to 30%, paste on the table.

Paste element 78 on the mask layer to one side, duplicate, move to
the other side, adjust, then merge these two together, click inside with your
magic wand, expand by 5, paste paper 9, invert, delete, select none.

Resize your tube to 38%, mirror, paste on the right side.

Paste element 12 at the bottom on the floor edge, duplicate, move
below the table layer and up by the sign, erase the edges sticking out
on each side.
Paste element 41 at the top on the arrow part of the sign.

Resize element 18 to 25%, paste on the booth seat, take your Pick tool,
hold the shift key, take the top square and drag down, then the other side,
until the record is flat, duplicate, adjust on the seat.

Resize element 13 to 30%, place on the table.
Resize element 21 to 30%, duplicate, paste one on one side, and
the other on the other side, adjust.
Duplicate a couple more times, resize these two to 90%, paste on the sign
below the wordart.
Resize element 86 to 40%, paste on the floor area under the table.
Resize element 73 to 15%, mirror, place on the seat below the tube on the right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


PTU She's So Classy


This tut was written April 27th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Lysisange.
Tube is called "Barbie"
She comes in several colors to choose from.
You need a license to use this art work. Please do not use without a license.
 You can find this art,  it is EXCLUSIVE to her store  HERE

Supplies Needed
I used PSPX...but any of them should work.
PTU Scrap Classy Barbie to match by Lil Mz's Brainstorms  HERE
Vix big mask 018  HERE
Check out the rest of the blog HERE

Font of Choice, I used
Casablanca Noir

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 2, resize your mask larger to 115%, paste, delete, merge group.

Paste element 69, in the center.
Free rotate element 47 to 90 degrees, paste on one side of the door, duplicate, mirror.

Resize the grass element to 85%, paste behind the door layer, erase any part
that is showing on the outside edge.
Resize element 82 to 65%, paste below the grass layer on the left side.

Resize your tube to 35%, paste on the side you prefer, I placed mine on the right.

Resize element 70 to 65%, paste on the right above the door layer.

Resize element 25 to 15%, place on the door handle, take your free hand tool,
draw around the lock handle to make it look like it is hanging on the door handle.

Resize element 26 to 20%, and element 27 to 15%, paste both on the couch.
Resize element 71 to 40%, paste on the couch.

Paste element 36 at the bottom under the couch layer, take your Pick tool
hold the shift key and grab one of the top squares and pull down on one side,
then do the other side until flat.
Resize element 51 to 50%, free rotate to the right at 45 degrees paste by the fountain,
sharpen once, had a white drop shadow.

Paste element 41 below the door layer with the faded part of the flowers on the left side
paste the door, erase all the is showing thru the windows and to the right,
duplicate, mirror, merge down.
  Then go to Effect, Texture and apply a brick wall texture to the flowers, size 25,
depth 1 or 2 depending on the look you want.

Resize element 89 to 35%, paste on top below the door layer, duplicate,
move above, erase the stem on the door, duplicate both, mirror both.
Resize element 45 to 20%, paste at the top on the door, duplicate, move over, duplicate,
mirror, duplicate, move over, duplicate, move to the bottom on the left door,
duplicate, move over.

Resize element 46 to 50%, paste on the couch below the dog and the other elements.
Resize element 109 to 60%, paste on the left below the fountain.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Wednesday, April 26, 2017

FTU A Mother's Love

This tut was written April 25th 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Alex Prihodko
Tube is called "My Baby"
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
FTU Scrap Spring Bouquet by LadyDragus HERE
Check out the rest of the blog HERE
RD Mask 153_2  HERE
Check out the rest of the blog HERE
Wordart HERE

Font of Choice, I used Ruthie

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 6, apply your mask, delete, merge group.

Resize frame to 75%, paste off to the left a bit.  Take your free hand tool, draw
around the frame, paste paper 6, invert, delete, keep selected,
mirror your tube, paste how you like, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian Blur, number on 5,
change the blend mode to Screen, then apply the Xero Filter-Soft Vignette,
with these settings
Elliptical
Foreground color- should be set on white
Diagonal dots
1, 1, 0, 255
Resize element 32 to 40%, apply Mura Meister Copies-Encircle, change
the first number to 30, move below the paper layer of the frame.

Resize your tube to 55%, paste on the right side of the frame.

Resize the branch to 60%, paste on the frame, flip, mirror, move to the left,
erase the bottom part that you don't want, duplicate, flip, mirror, move back
to the left at the bottom, duplicate again, free rotate to the left at 90 degrees,
paste under your tube at the bottom.

Paste the frame, resize to 75%, erase the circle of the frame and place the flower part
on the left above the other flowers.
Duplicate, mirror, flip, resize to 75%, paste at the top right below the tube.
Resize element 32 to 40%, paste below the flower at the top.

Resize element 5 to 50%, paste on the frame layer on the left and up some,
once placed how you like, erase the vase part and any other part you don't want,
duplicate, mirror and move down under the tube layer, duplicate again,
move to the right of the tube a bit.

Paste the scatters on the left below the tube layer, erase the parts that
are in the frame.

Paste element 31 on the frame layer, erase the clock and ribbon, leaving just
the flowers, duplicate, mirror, move up some, duplicate, move down and
out on the right behind the tube.
Resize the little poser to 30%, mirror, post at the upper left where you like.

Add a wordart of choice or the one I used, then select, float, defloat, add a new
raster layer, fill with a color of choice, add a slight bevel, then add a new layer
expand by 2, fill with white, move below.
Paste Scatter-2 on the mask layer on one side, duplicate, mirror, duplicate
as many times as you like and arrange around the frame.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Sunday, April 23, 2017

PTU Pretty Marguerite


This tut was written April 23rd, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
The tube is called Marguerite
This tube is Beautiful, she comes in two colors, you will want this
tube added to your collection.
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO  Store  HERE 

Supplies Needed
I used PSPX...but any of them should work.
Scrap to match, "Marguerite" by Lil Mz's Brainstorm HERE
Vix big mask 018  HERE
Check out the rest of the blog HERE
Filter
Screen Works-Light Gauze
Mura Meister Copies-Encircle

Font of Choice, I used Margarita in August

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 3, resize the mask larger to 120%, apply, delete, merge group.

Resize element 11 to 90%, paste, duplicate, change the blend mode to burn,
merge down, click inside with your magic wand, expand by 5 paste paper 3,
invert, delete, keep selected.
Mirror your tube, paste, delete, select none, duplicate, go to Adjust, Blur,
Gaussian blur, number on 5, change the blend mode to Screen.
Apply the Screen Works Filter-Light Gauze.
Paste element 6 below the paper layer of the frame.

Paste element 94 at the bottom duplicate, mirror, duplicate twice more
and move up some on both.
Paste element 62 below the greenery and in the center so some
shows at the bottom.

Resize your tube to 45%, paste on top of the greenery on the right.

Resize element 14 to 45%, mirror, paste below the tube on the right.
Resize element 4 to 60%, paste behind the tube to the left of it.
Resize element 55 to 70%, paste below the box on the left, duplicate, mirror.
Resize element 39 to 55%, paste below the box layer off center.

Resize element 83 to 55%, apply Mura Meister Copies-Encircle, change the
first number to 20, paste below the paper layer of the frame.
Paste element 80 below the green circle you just made, duplicate, mirror.

Resize element 79 to 60%, paste below the box on the left.
Resize element 93 to 45%, paste on the left below the tube by the leg.
Resize element 26 to 25%, paste in front of the basket.
Resize element 55 to 60%, paste on the basket below the tube.

Resize element 8 to 40%, paste below the box on the left, duplicate, mirror.
Duplicate the taller flower that is pink and purple, move to the left and below
the leaves layers and up some.

Resize element 13 to 25%, paste on the right below the foot of the tube.
Resize element 45 to 40%, paste at the bottom in front of the tube, erase the
stem over the hand.

Now go back to the blades of grass with the dirt on the bottom, duplicate,
move to the right below all the other flowers, duplicate, mirror.
Duplicate the boxes on the left, mirror, adjust.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



PTU Star Fairy Beauty


This tut was written April 23rd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Alex Prihodko.
Tube is called Star Fairy.
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE  

I used PSPX...but any of them should work.
PTU Scrap Star Fairy by Irish Princess Designs  HERE

This kit is Beautiful, filled with beautiful flower and star celestial elements
for your fairy, fantasy tagging fun.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask Set 153_2  HERE
Check out the rest of the blog HERE

Font of Choice, I used Dragonfly

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 16, apply your mask, delete, merge group, flip.

Resize your tube to 45%, paste.

Resize elment 22 to 35%, paste on the left at the bottom above the tube layer.
Resize element 31 to 85%, paste on the right side.

Resize element 20 to 35%, paste below the tube on the right, duplicate, move
down some, duplicate, mirror, adjust behind the mushroom, duplicate one
more time and move up behind the tube more.

Resize element 28 to 35%, paste at the bottom below the harp, duplicate, move
to the left, duplicate, mirror, adjust. Duplicate two more times, move toward the
center and down so some of the darker leaves show at the bottom.

Resize element 54 to 90%, paste on one side on the mask layer, duplicate, mirror.
Resize element 26 to 60%, paste on the column at the top, duplicate, mirror.

Resize element 19 to 95%, paste at the bottom, being on the top layer.
Resize element 100 to 20%, mirror, paste on the right.
Resize element 33 to 33%, mirror, paste on the left more toward the top.

Resize element 32 to 50%, paste on the left above the tube layer.
Resize element 8 to 80%, paste at the top below the tube layer on the flowers.
Resize element 92 to 45%, paste below the harp, duplicate mirror, adjust.

Add any other elements that you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Saturday, April 22, 2017

PTU Sea Breeze



This tut was written April 22nd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of Alex Rud
formerly known as Lightartist_XXX , but seems he has since change the
name he goes by.
Tube is called Vanessa.
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Sea Breeze by PurpleDream Scraps  HERE
This kit is beautiful, filled with lots of elements for your sea life, sailing or
beach fun tagging needs
Check out her blog HERE
RD Mask 153_4  HERE
Check out the rest of the blog HERE

Font of Choice, I used Crispy
This font will give the swirl part on some Capital letters, so you
will have to play around with the letters to get the swirl to show.

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Go to Image, canvas size, 800 x 800.
Paste paper 9, apply your mask, invert, delete.

Resize element 53 to 90%, paste on the mask layer, click inside with
your magic wand, expand by 5, paste paper 1, move how you like,
invert, delete, select none.

Resize your tube to 35%, paste about center.
Paste element 49 under your tube at the bottom, duplicate, mirror.
Paste element 3 on the right behind the tube.
Resize element 30 to 85%, paste behind the boat, duplicate, mirror,
adjust behind the tube.
Mirror element 41, paste on the side of the boat.

Paste element 17 on the left below the palm tree, duplicate, resize to 65%, move
in front of the palm tree on the left, duplicate, mirror.
Resize element 19 to 35%, paste on the right on the sand by the grass.

Resize element 40 to 15%, paste on the shelf on the boat.
Resize element 43 to 25%, paste on the top shelf of the boat.
Resize element 42 to 13%, paste by the wood on the right.

Resize element 33 to 17%, paste on the shelf of the boat behind the other shell.
Resize element 36 to 15%, paste on the top shelf of the boat, free rotate
to the right at 15 degrees.
Resize element 34 to 20%, paste on the bottom boat shelf below the netting.

Resize element 18 to 45%, paste below the palm tree on the left and
move up some to make it look like it is hanging off the branch.

Paste element 9 at the top being on the top layer, give it a lighter color drop shadow.
Resize element 35 to 50%, paste behind the tube on the left,
duplicate, move up some, duplicate, mirror, move above the log layer on the right,
duplicate again, move back behind the tube.

Resize element 31 to 30%, paste under the leg of the tube on the right.
Resize element 21 to 30%, paste on the left by the tube's foot.
Resize element 14 to 20%, and one at 15%, paste at the top, mirror one.
Resize element 10 to 35%, paste on the sand at the bottom.
Paste element 27 at the bottom more on the tube layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



FTU Mindful Angel

This tut was written April 22nd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  VeryMany.
Tube is called "Flower Angel"
You need a license to use this art work. Please do not use without a license.
 You can find this art at their store  HERE

Supplies Needed
I used PSPX...but any of them should work.
FTU Scrap Mindful Angel by Chaos Priestess HERE
Check out the rest of the blog HERE
RD Mask 153_2  HERE
Check out the rest of the blog HERE

Font of Choice, I used Acryle Script

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 5, apply your mask, delete, merge group.

Paste frame 2, click inside with your magic wand, expand by 5, paste
paper 2, move to how you like, invert, delete, select none.

Resize your tube to 50%, paste on the right.

Paste the Parchment on the left below the frame paper layer, free
rotate to the left at 15 degrees.

Paste the pocket watch on the right below the tube layer.
Paste the clock on the left below the Parchment layer.

Resize the hanging tears to 80%, paste below the frame layer,
place how you like, erasing and parts outside the frame.

Paste flower 4 at the top below the paper layer of the frame.
Paste bow 3 on the frame layer at the bottom.
Paste the feather below the bow.
Resize the foliage to 65%, free rotate to the right at 90, paste under
the clock on the right bottom.

Paste the glitter butterfly on the left below the tube, duplicate, resize
to 65%, move above the tube and down on the right.

Resize the heart to 75%, paste on the left below the feather layer.
Go back to the flower at the top, duplicate, resize to 75%, move down to
the left below the heart layer.
Paste the scroll at the bottom just above the frame layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Friday, April 21, 2017

PTU Beautiful Mermaid


This tut was written April 21th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Alex Prihodko.
Tube is called Genevieve.
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Under The Sea by PurpleDream Scraps  HERE
This kit is beautiful, filled with lots of elements for your sea life or sailing or
beach fun tagging needs
Check out her blog HERE
RD Mask 153_4  HERE
Check out the rest of the blog HERE
Millie's PSP Madness Template 774  HERE
Check out the rest of the blog HERE
Filters
Xero-Radiance

Font of Choice, I used Adventure of the old Giant

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate,
close the original, delete the credits.

Go to Image, canvas size, 800 x 800.

Resize your tube to 50%, paste at the bottom under the wordart layer.
Move the wordart down more, select the wordart, float, defloat,
add a new raster layer, fill with a color of choice, I used #298ae8.

Resize element 11 to 80%, paste at the bottom under the tube.
Resize element 12 to 65%, paste under the other sand on one side,
duplicate, mirror, duplicate again, move to the center more.

Paste element 44 behind the boat on the left, duplicate, mirror,
move below the circle layer.

Paste element 51 at the bottom behind the tube.
Resize element 23 to 65%, paste on the right below the boat.
Paste element 42 on one side above the boat at the bottom, duplicate, mirror.

Layer 1 of the template, add a new layer, fill with #298ae8.
Layer 2, paste paper 6, invert,delete.
Layer 3, paste paper 6, invert,  delete.
Layer 4, paste paper 7, invert, delete.
Layer 5 of the template, paste paper 5, invert, delete,
paste, delete, select none.
Apply the Xero Filter-Radiance.

Layer 6 paste paper 7, invert, delete, mirror your tube, paste, delete,
apply the Xero filter-Radiance.

Layer 8, new layer fill with the blue color again.
Resize element 25 to 70%, paste on the left behind the boat, duplicate, mirror,
move below the small frame on the right.
Paste element 35 behind the tube layer on the right more, duplicate,
move to the left and up a bit.

Resize element 19 to 30%, paste at the bottom on the sand above the wordart.
Resize element 3 to 15%, paste on the left on the sand.
Resize element 4 to 30%, paste by the other shell.
Resize element 5 to 20%, paste where you like.

Resize element 55 to 40%, paste on the left below the tube by her hand.
Resize element 21 to 50%, paste on the right.
Resize element 47 to 35%, paste by the wordart.
Resize element 20 to 35%, paste at the top.
Paste element 37 below the Palm tree layers on one side, duplicate, mirror,
move the right one up a bit.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Thursday, April 20, 2017

PTU Be My Honey Bee


This tut was written April 20th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Eskada-Elegance Team.
Tube is called Amelia 3.
You can use this in your personal to use kit as a CU element
or as Individual tubes in your tags
CU-PU Only!
 You can find this art at one of the Stores that
Irish Princess Sells in below  

I used PSPX...but any of them should work.
PTU Scrap Beary Sweet by Irish Princess Designs  HERE
This kit is Awesome filled with lots of wonderful elements and papers
for your Spring, Summer and more tagging fun.
You can also find this kit at one of these stores HERE, HERE, HERE
Vix Big Mask_018  HERE
Check out the rest of the blog HERE
Filter
Xero-Artworx
EyeCandy 4000-Gradient Glow

Font of Choice, I used Sweetline

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800x800
Paste paper 5, resize to 85%, resize your mask to 115%,apply, delete, merge group.

Resize element 84 to 65%, free rotate to the right at 10 degrees, click inside
with your magic wand, expand by 5, paste paper 17, invert, delete, keep
selected, mirror your tube, paste, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur number on 5,
change the blend mode to screen, apply the Xero filter-Artworx,  merge down.

Resize your tube to 35%, paste on the left side above the frame layer.
Now go back to the tube in the frame, duplicate, mirror, move below the
tube already in the mirror, adjust how you like, then erase any
part outside the frame, change the blend mode to Overlay.

Resize element 100 to 80%, paste at the  bottom under the tube.
Apply a fat white gradient glow using EyeCandy 4000, width on 3.
I erase the one bee under the tube leg.

Resize element 87 to 75%, paste just above the mask layer at the bottom,
duplicate, mirror, flip, adjust.
Resize element 29 to 95%, paste below the paper layer of the frame, mirror.
Resize element 104 to 25%, paste at the upper right on the frame.
Resize element 103 to 20%, paste on the left below the tube layer, duplicate,
move above the tube and erase the part by her hand to make it look like
her hand is on the bee's head.
Resize element 86 to 43%, paste below the green wreath at the bottom,
duplicate, mirror.

Resize element 8 to 20%, paste at the bottom below the tube layer by
the shoe on the left, duplicate, resize to 75%, paste on the right toward the bottom.
Resize element 96 to 80%, paste on the left below the wordart layer, duplicate,
mirror, move below the paper layer of the frame on the right.
Resize element 4 to 20%, paste on the right side down some, duplicate, mirror,
resize to 60%, paste at the upper left.
Paste element 94 on the wordart at the bottom below the tube layer.
Resize element 105 to 40%, paste on the right below the wordart.
If you want to duplicate again, resize to 70%, paste under the wordart in the letter
O and erase all the parts outside the O.
Resize element 82 to 50%, paste on the left behind the tube below the wordart.

Add any other elements that you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Wednesday, April 19, 2017

CT Tag-Art of Tunchy-Silvi

~CT Tag for Mystical Scraps (Artists)
©Art of Tunchy
Tube: Silvi
This tube is ready for your Attitude, Sexy, Dancing 
and more tagging fun.
She comes in several different colors.
You can find the tube HERE



PTU I Love Spring


This tut was written April 19th, 2017 for those with a basic knowledge of psp.
I did not use a tube with this kit, it is beautiful on its own.

Supplies Needed
I used PSPX...but any of them should work.
Scrap A Touch of Easter by PurpleDream Scraps  HERE
This kit is filled with awesome elements and papers for your
Easter and Spring tagging fun.
Check out her blog HERE
Vix Big Mask_018  HERE
Check out the rest of the blog HERE
Sylly Creationz Template 28 I heart Spring HERE
Check out the rest of the blog HERE
Filter
xero-Fritillary

Font of Choice, I used Georgia

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate,
close the original, delete the credits.
Resize to 85%, all layers checked, then go to Image, canvas size, 800 x 800.

Paste paper 2, apply your mask, move to just above the white background.

Green rectangle on the bottom leave as is.
Light pink rectangle, apply the xero filter, Fritillary with these settings,
5, 30, 100, 30

Merge the pink square right down with the pink square left, paste paper 1,
invert, delete, also delete the template layer.
Merge the green square right down with the green square left, paste paper 4,
invert, delete.

Merge the dark blue rectangle top down with the dark blue rectangle bottom, paste
paper 5, invert, delete.
Leave the pink rectangle as is.
Light blue rectangle paste paper 4, invert, delete.
Leave the pink noisy circle as is.
Blue circle, paste paper 9, invert, delete.
White circle and Green circle leave as is.
Light pink circle paste paper 8, invert, delete.

Resize element 46 to 90%, paste at the bottom, duplicate, move below
the template layers.

Resize element 47 to 90%, paste at the bottom on top of the dirt, duplicate, move
below the dirt layer and up some.
Resize element 64 to 65%, paste on the pink noisy circle.
Resize element 45 to 80%, paste below the wordart.
Resize element 27 to 50%, paste on one side below the grass layer, duplicate, mirror.

Resize element 33 to 50%, paste on one side, duplicate, mirror,
duplicate again, resize to 75%, move toward the center more.
Resize element 28 to 45%, paste a little off center below the grasses.
Resize 58 to 45%, paste at the bottom below the top grass layer.
Resize element 30 to 40%, paste above the blue flower layer on the right,
duplicate, mirror.

Resize element 50 to 90%, paste on the right above the bottom grass layer,
duplicate, mirror, erase the overlapping parts.
Resize element 10 to 35%, paste on the right between the grasses.
Resize element 4 to 25%, paste at the bottom above the grass on the left
of the pot.
Resize element 5 to 40%, paste on the left.

Resize element 3 to 35%, paste on the right of the pot at the bottom.
Resize element 17 to 25%, paste on the right of the pot below the grass layer.
Resize element 49 to 70%, paste at the bottom below the chicks, erase the
part on the rabbit.

Resize element 51 to 70%, paste at the bottom below the chicks.
Resize element 48 to 70%, paste on one side above the pink flowers, duplicate, mirror.
Resize element 43 to 50%, paste below the tree layer on the right,  move
out to the right of the rabbit, duplicate, mirror.
Resize element 23 to 25%, paste on the right below the little yellow flowers layer.
Resize element 19 to 25%, paste on the little basket, erase the two on the right.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.