Friday, June 30, 2017

CT Tag Creepie Cuties

~CT Tag for Mystical Scraps (Artists)
©Creepie Cuties
Tube: Star Catching

This tube is adorable and she is out catching stars.

You can find the tube HERE




PTU Relaxing on the Beach


This tut was written June 29, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey
Tube is called Tanned.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Beach Fun by PurpleDream Scraps  HERE
This kit is Awesome, 55 Elements and 08 Papers,
ready for your summer beach fun tagging needs.
Check out her blog HERE
Dragonfly Mask 0018  HERE
Check out the rest of the blog HERE
Filter
xero-SoftMood and Clarity
Font of Choice, I used Heaven Matters

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 7, apply your mask, delete, merge group,
resize later to fit your tag.
Paste paper 8, apply the same mask, delete, merge group, take your Pick tool,
hold the square at one of the top ones, hold your shift key and drag down on
one side, then the other side until it is as flat as you like, duplicate, mirror,
adjust them to your liking.
Resize element 24 to 85%, paste below one of the sand paper layer.

Resize element 45 to 95%, paste below the sand paper layer.

Paste your tube at the bottom where you like.

Paste element 48 below the water layers, duplicate, resize to 50%, paste
on one side, duplicate, mirror, adjust to your liking.

Resize element 27 to 50%, paste behind the tube on the right.
Resize element 50 to 25%, paste in front of the tube where you like.
Resize element 20 to 40%, paste on the right behind the castle layer.
Resize element 16 to 40%, paste on the left below the foot of your tube.
Resize element 11 to 30%, paste on the left on the sand, duplicate
move more to the right behind the tube.
Resize element 40 to 20%, paste on the right by the tube.

Paste element 46, below the rock on the right, mirror, move down more on the left.
Paste element 47 on the mask layer, adjust to your liking.

Resize element 42 to 30%, paste on the left on the greenery, duplicate, move to
the right below the starfish layer.
Resize element 33 to 30%, place on the sand where you like, duplicate, move
over a bit.

Resize element 8 to 25%, mirror, place behind the small rock on the left.
Resize element 51 to 60%, paste at the upper left above the rock layer.

Resize element 4 to 15%, mirror, paste above the rock on the left and down some.
Resize element 2 to 20%, paste below the water by the castle on the right.
Resize element 5 to 15%, paste on the mask layer in the opening of the rock.

Resize element 18 to 50%, paste on the mask layer and down so just some of it
shows in the opening of the rock, duplicate, move to the left past the
rock edge and down some, duplicate again, mirror, adjust on the right side.

Resize element 10 to 40%, mirror, place on the left on the smaller rock.
Resize element 17 to 40%, paste below the tube at the bottom by her knees.
Resize element 28 to 20%, place above the rocks at the bottom.
Resize element 3 to 25%, paste on the rock at the top more.


Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Close off any background you may have used, resize first then, duplicate, go to
Adjust, Blur, Gaussian blur, number on 4, change
the blend mode to Screen. 
Apply the xero filter-Soft Mood three times, then Clarity once.
add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Wednesday, June 28, 2017

PTU USA Independence Babe


This tut was written June 28th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
You need a license to use this art work. Please do not use without a license.
 You can find this tube called USA Pin Up at S&CO  Store  HERE
She is ready to celebrate the 4th of July in style

Supplies Needed
I used PSPX...but any of them should work.
Scrap USA Pin Up to match by LMB HERE
Template 01 by Millie's PSP Madness HERE
Check out the rest of the blog HERE
WSL Mask_84 HERE

Filters
EyeCandy 4000-Gradient Glow
xero-Bad Dream, Soft Vignette and Clarity

Font of Choice, I used Do I Like Stripes

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open your template, delete the credits, go to Image, Canvas size and
make it 800 x 800 or a size you prefer.
Paste paper 4 above the white background, apply your mask, delete, merge group.

Paste element 21 on the mask layer, duplicate, mirror, add noise to both at
100%.
Layer 1 of the template, apply the penta.com filter, Dot and Cross, then
add a fat white gradient glow using
EyeCandy 4000, width 3,
25, 100
Layer 2, paste paper 5, invert, delete, add the same fat gradient glow as before.
Layer 3, paste paper 4, adjust so some of the sparkles show, invert, delete, add
the same gradient glow.
Layer 4, paste paper 8, invert, delete, apply an inner bevel with these settings
Shape 2, Width 2,
18, 9, 1, 10
50, 50, 30
Color White 
Merge layer 6 down with layer 5, add noise at 100%.
Delete layer 7 and 8 unless you prefer to have them.
Layer 9, paste paper 14, invert, delete, apply the same fat gradient glow.
Layer 10 add noise at 100%, add a blue fat gradient glow to the star.

Merge layer 12 down with layer 11, click on the red square, expand by 1,
resize your tube to 45%, paste on the right square, duplicate the tube, mirror, paste
on the left square, invert, delete, select none.

Merge layer 14 down with 13 and do the same as above with your tube, only do
them the opposite from the top ones.
Add the Xero filter-Bad Dream to each of these tubes, then the Soft Vignette with
these settings
Elliptical  
Foreground color, (your foreground color should be on white)
Diagonal dots
1, 1, 0, 255
Take your magic wand, click on the white parts of the frames, add noise at 100%.

Resize your tube to 40%, mirror, paste in the center, on the top layer, move
the wordart Independence down more on the bottom, add the fat white
gradient glow to this also. It will be adjusted once the tag is almost done.

Add a fat white gradient glow to the top wordart and move up just a bit.
Paste element 118 on the right above the tube at the bottom, erase the big butterfly,
duplicate, mirror, adjust.
Move the wordart Independence up above the grass.

Paste element 124on top of this grass, duplicate, mirror, adjust down some,
duplicate twice more, move down more under the wordart.

Paste element 47 on the grass where you prefer.

Resize element 94 to 60%, paste on the left below the flower grass.
Resize element 18 to 60%, paste on the left below the tube layer, duplicate, mirror.
Paste element 30 below the tube layer.
Resize element 27 to 75%, paste above the sparkles at the top, duplicate, mirror.
Resize element 24 to 35%, paste on the right, duplicate, mirror, move back
to the right.
Resize element 100 to 10%, paste on the headlight of the car, duplicate, move over
to the other headlight.
Resize element 100 to 30%, paste on the left at the bottom, duplicate, mirror.
Resize element 42 to 20%, paste on the right on the oval layer of the template.
Paste element 99 below the car on the right, duplicate, mirror, erase
the extra on the tube.
Resize element 80 to 35%, paste on the left.
Resize element 120 to 75%, paste at the bottom above the mask layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any background you had, merge visible.
Resize first, apply the xero filter-Clarity,
then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



PTU Celeste Beauty


This tut was written June 27th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
You need a license to use this art work. Please do not use without a license.
 You can find this tube called Celeste2 at S&CO  Store  HERE
She is beautiful and comes with solid color and a flowery dress

Supplies Needed
I used PSPX...but any of them should work.
Scrap Celeste 2 to match by LMB HERE
Vix big mask 018  HERE
Check out the rest of the blog HERE
Template 28 by Sylly Creationz HERE
Check out the rest of the blog HERE

Filters
Two Moon-Warm Wash Cloth
Mura Meister Copies-Encircle

Font of Choice, I used Aulyars Italic

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open the template, hold the shift, hit the d and duplicate, close the original.
Delete the credits, and the top 6 layers plus the light pink circle,
green circle and white circle. Also delete the little flowers unless
you would like to use them.
Go to Image, resize all layers checked, resize to 85%, then go to
Canvas size and make that 800 x 800.

Paste paper 10 above the white layer, apply your mask, delete, merge group.
As always adjust your mask to fit your tag better with your Pick tool.

Select the blue circle, float, defloat, paste paper 10, move down so the sparkles
on the paper show, paste your tube, invert, delete, select none.
Duplicate your tube, on the bottom tube,
apply the filter, Two Moon, Warm Wash Cloth with these settings
130, 59, 19, 147, 8, 0,0,0
On the top tube, go to Adjust, Blur, Gaussian blur, number on 4, change the
blend mode to Screen, merge down.
Pink noisy circle, change the color by going to Adjust, Hue and Saturation, Colorize,
change the numbers to
Hue 133, Saturation 255
Resize element 35 to 45%, free rotate to the left at 45 degrees, apply Mura Meister
Copies-Encircle, change the first number to 25, paste above the close up tube.

Resize your tube to 45%, paste on the left side.

Select the green rectangle on the bottom, paste paper 14, invert, delete.
Select the light pink rectangle, paste paper 2, invert, delete, delete the
template layer also.
Merge the pink square right down with the pink square left, paste paper 14,
invert, delete.
Merge green square right down with green square left, paste paper 2, invert, delete.
Merge the dark blue rectangle top down with dark blue rectangle bottom,
paste paper 14, invert, delete.
Select the pink rectangle, paste paper 2, invert, delete.
Select the light blue rectangle, paste paper 4, invert, delete.

Resize element 10 to 75%, paste on the right side on the top layer, moving
down where you like, duplicate, move to the upper left behind the tube.

Resize element 39 and 40 to 25%, paste at the bottom above the tube layer, duplicate
the flatter one and move to the left on the tube.
Resize element 51 to 25%, paste below the tube on the left, duplicate twice more,
move over a bit and down, erase any stem showing at the bottom.
Resize element 41 to 75%, paste at the bottom between the flowers and to
cover the edge of the tube.

Resize element 50 to 55%, paste behind the tube on the left, duplicate, mirror,
move below the flowers and to the right of the tube.

Resize element 25 to 35%, paste below the flowers at the bottom.
Resize element 16 to 35%, paste at the upper part where you like, below the template
layers.
Resize element 20 to 30%, paste below the flower at the bottom on the left,
duplicate, move below the flower on the right and up a bit, duplicate again, move
down and over a bit more on the right.

Resize element 22 to 35%, paste on the right below the white flower.
Duplicate the white flower and one of the blue flowers, move to the right below the
star with the straw bow and button.

Paste element 54 on the mask layer on the right, duplicate, mirror, adjust.
Paste element 29 below the green on the mask layer, arrange how you like,
duplicate a couple of times and move around.
Resize element 84 to 35%, paste at the bottom by the bottles on the right,
duplicate, move below the bottles.
Resize element 48 to 55%, paste on the left and down on the top layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Saturday, June 24, 2017

PTU American and Proud


This tut was written June 24th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Lys Isange
You need a license to use this art work. Please do not use without a license.
 You can find this tube called American Beauty at S&CO  Store  HERE
She is ready to celebrate the 4th of July in style

Supplies Needed
I used PSPX...but any of them should work.
Scrap American Beauty to match by LMB HERE
DD Patriotic Mask_3  HERE
Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze

Font of Choice, I used Script MT Bold

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 2, apply your mask, delete, merge group.
Paste paper 12, apply the same mask again, delete, adjust so some of
the blue is showing, merge group.

Paste element 26, click inside with your magic wand, expand by 7, mirror and paste
your tube, invert, delete, paste paper 12, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur, number on 4,
change the blend mode to Screen or one you prefer.
Apply the Screen Works filter-light Gauze, merge down.

Resize your tube to 30%, paste on the left.

Resize element 33 to 75%, paste at the bottom on the legs of the tube
to the left. Apply a fat gradient glow with the color white.

Resize element 102 to 75%, mirror, paste below the wordart on the right.
Resize element 12 to 40%, paste at the top of the frame.
Resize element 17 to 25%, paste by the bike at the bottom.
Resize element 15 to 15%, duplicate a couple of times, place where
you like.
Resize element 4 to 20%, paste on the right of the hat, duplicate, mirror, move
back to the right.
Paste element 44 on the top layer, move to the left, duplicate, move to the right.

Resize element 51 to 20%, paste below the tube layer at the lower left, duplicate,
mirror, move to the upper right.
Resize element 50 to 25%, paste below the bike.
Resize element 30 to 40%, free rotate to the right at 45 degrees, paste at the
bottom, being on the top layer, duplicate, mirror, move below the shoes layer.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.




Friday, June 23, 2017

CT Tags for Lys Isange

CT tags for Lys Isange with matching kit by Lil Mz's Brainstorm
Tube is called "Jessy"
She is beautiful and comes in three colors

You can find the tube and kit at ScrapsNCompany

Tube HERE

and the

Kit HERE



Thursday, June 22, 2017

PTU Summer Pleasures


This tut was written June 22nd, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Vadis.
Tube is called Summertime Pleasure
You need a license to use this art work. Please do not use without a license.
 You can find this art at PFD store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Sunset by Irish Princess Designs  HERE
This kit is beautiful, with shades of peach  and lavender, and lots of girly,
Victorian and garden elements.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 154_2 HERE
Check out the rest of the blog HERE
Filters
Screen Works-Light Gauze

Font of choice, I used She Always Walks Alone

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 7 to 85%, apply your mask,
delete, merge group.

Paste element 6, resize to 70%, duplicate, free rotate to the right at 15 degrees, click inside
with your magic wand, expand by 5, paste paper 7, invert, delete, keep selected.
Mirror your tube, paste in the frame, delete, select none. Duplicate the paper, free rotate
to the left and move to the other frame.
Duplicate the tube, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen.  Apply the Screen Works filter-Light Gauze, merge down.

Resize your tube to 45%, paste on the left above the frame layers.

Resize element 25 to 30%, paste behind the tube on the left.
Resize element 52 to 40%, paste below the tube on the left, erase the stems to
make them look like they are in the planter, duplicate, move the one in
the back up more, duplicate once more, move over to the right of the tube.

Resize element 38 to 40%, paste below the other flowers and up.
Resize element 34 to 40%, free rotate to the right at 40 degrees, mirror,
paste below the other flowers on the left.

Resize element 4 to 90%, paste on the frame layer on the left, duplicate, mirror, adjust.

Resize element 13 to 55%, paste under the tube at the bottom.
Resize element 5 to 30%, paste below the tube on the right.
Resize element 17 to 30%, paste on the right below the flower.
Resize element 29 to 40%, paste above the clock layer on the right, duplicate,
move below the clock and to the left some.

Resize element 84 to 75%, paste on the frame layer on the right behind the clock.
Resize element 10 to 30%, paste at the bottom below the flower how you like.
Resize element 79 to 40%, paste below the clock layer on the right at the bottom,
duplicate, mirror, move below the tube layer and back to the right more,
erase the larger hearts.

Resize element 7 to 10%, paste on the planter on the left, duplicate, move over some
and below the tube layer.
Resize element 22 to 25%, paste on the right above the orange flower, duplicate,
mirror behind the tube on the left.
Resize element 51 to 30%, paste on the right above the netting, duplicate, mirror,
move above some of the flowers in the planter how you like.
Resize element 38 to 35%, paste behind this flower.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Saturday, June 17, 2017

CT Tags for Lys Isange

CT tags for Lys Isange with matching kit by Lil Mz's Brainstorm
Tube is called "American Patriotic"
She is beautiful and ready for the 4th waving her flag.

You can find the tube and kit at ScrapsNCompany

Tube HERE

and the
Kit HERE



Friday, June 16, 2017

CT Tags Irish Princess Help 4 Casper

*~*CT for Irish Princess Designs *~*
Kit: *~*~Gothic Wish Fairy Collab•*~*

*~*~* IN STORE SOON - Help 4 Casper*~*~*
You will be able to find the kit and Clusters soon at
Hania Designs HERE

This kit is part of a fundraising collaboration among
artists, designers, and taggers alike!

These Clusters will also be available soon!!

Her "Help 4 Casper"
FB: https://www.facebook.com/groups/Help4CasperFanGroup/



Cluster Preview



Here are some tags I did with the Clusters




Thursday, June 15, 2017

FTU USA-4th of July

This tut was written June 15th, 2017, for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Hunter Art.
This is one of his tube packages
You need a license to use this art work. Please do not use without a license.
 You can find this art at S&CO  Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap USA 4th of July by Bitzy Beez  Designz HERE
Check out the rest of the blog HERE
WSL Mask_84  HERE

Filters
Xero-Mistifier
EyeCandy 4000-Gradient Glow (Optional)

Font of Choice, I used Hard Stones San Strip

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

This is a Quickie 😏

Open a new image 800 x 800, paste paper 14, resize your close up to 80%, paste
on the paper and move to the right some, merge down, apply your mask,
delete, merge group.
Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the blend
mode to Screen, merge down.
Apply the Xero filter-Mistifier-default settings.

Resize your full tube to 70%, mirror, paste on the left.

Resize wordart 4 to 30%, paste at the bottom to cover the edge of the legs,
add a fat gradient glow of choice.
I used Eye Candy 4000, fat gradient with the first color being a blue and
the second color being white.

Resize the wagon 1 to 45%, paste below the tube layer.
Paste fireworks 2 below the mask layer, add noise at 100%, duplicate, mirror,
adjust so the blue shows at the bottom like the left side does, then erase all the rest
of the fireworks as much as you like.

Resize Deco 2 to 40%, paste below the tube on the left, duplicate, resize to 95%,
mirror, adjust on the right.

Resize fireworks 6 to 60%, paste above the other fireworks at the top, duplicate, move
down on one side, duplicate, mirror.
Resize rocket 1 to 35%, paste at the upper right below the mask layer.
Resize flag 1 to 40%, paste below the tube at the upper left.

Resize guitar 1 to 40%, mirror, place at the bottom above the wordart on
the left.
Resize drink 1 to 35%, paste on the right at the bottom above the wordart.
Resize flower 5 to 10%, paste on the guitar, duplicate, move to the right on the glass,
duplicate, move below the glass.

Add any other elements you would like to add.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.




Wednesday, June 14, 2017

PTU Stormy Eyes


This tut was written June 14th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
Tube is called Sexy Man
Spend $8.00 and you can get him as a Bonus Tube.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Stormy Seas by Irish Princess Designs  HERE
This kit is perfect for your Sailors, Mermaid any type of sealife tagging fun.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 158_3 HERE
Check out the rest of the blog HERE

Font of choice, I used FoglihtenNo04

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 10 to 85%, apply your mask,
delete, merge group, duplicate, mirror.

Paste element 32 at the bottom, duplicate, mirror.
Paste element 19 at the bottom, duplicate, mirror, duplicate again, move
below element 32 and down some, erase the grass part on this one, duplicate,
mirror, adjust all to your liking.

Paste element 31 on the left below all the sand layers.
Resize element 94 to 95%, paste on the left above the light house, duplicate, mirror.
Paste element 36 below the one on the right.
Paste element 35 below the light house layer and down on the right, duplicate,
mirror, duplicate the left one, move up some.
Resize element 50 to 45%, paste on the right below the sand layers, duplicate, mirror.

Resize element 28 to 55%, paste on the top layer at the bottom left, free rotate
to the right at 25 degrees.
Resize element 60 to 40%, paste behind the anchor chain on the left, free
rotate to the left at 10 degrees.

Resize your tube to 65%, paste below the anchor layer and off center.
Duplicate the anchor, mirror, move below the tube and erase the anchor showing
behind the leg on the right.

Paste element 41 at the top behind the tube, duplicate, resize to 60%, move
over to the left over the light house.

Resize element 25 to 35%, paste on the left at the bottom above the anchor.
Resize element 72 to 35%, paste below the shells on the left, duplicate, mirror.
Paste element 30 below the light house.
Resize element 90 to 60%, paste at the upper left below the tube,
duplicate, mirror.
Resize element 33 to 35%, paste at the bottom by the left leg of the tube.
Resize element 29 to 35%, paste below the crab to cover the right leg edge.
Resize element 22 to 35%, paste on the right below the tube layer.
Paste element 46 at the bottom just below the crab.
Paste element 17 behind the tube on the ship how you like.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Tuesday, June 13, 2017

CT Tags for Lys Isange

CT tags for Lys Isange with matching kit by Lil Mz's Brainstorm
Tube is called "Hot Summer"
She comes in 3 colors
She is hot and ready for some summer fun.
You can find the tube and kit at ScrapsNCompany

Tube HERE

and the
Kit HERE



FTU 4th of July

This tut was written June 13th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
Tube is 4th of July Special-tube 3
You need a license to use this art work. Please do not use without a license.
 You can find this art at her store  HERE  

I used PSPX...but any of them should work.
FTU Scrap Let Freedom Ring by Jenny's Designz  HERE
Check out the rest of the blog HERE
Angie Tagged Me Mask 18  HERE
Check out the rest of the blog HERE
Animation 472-485 by Scrappy Bit of Fun HERE
I used 480
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
xero-Fritillary

Font of choice, I used Stripes and Stars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, paste paper 3, apply your mask, delete, merge group.

Resize flower 3 to 83%, apply Mura Meister Copies-Encircle, change the first
number to 16.
Paste frame 3, click inside with your magic wand, expand by 5, paste paper 5,
invert, delete, select none, move below the frame.
On the paper in the frame apply Xero filter-Fritillary with these settings
5, 30, 100, 63
Resize frame 5 to 93%, paste below the paper layer of the red frame.

Resize your tube to 35%, paste on the frame layer.

Resize hat to 75%, paste on the right of the tube.
Paste the car behind the tube more to the left.

Paste the lighting bugs on one side over the flowers, duplicate, mirror.
Paste shoe 2, resize to 90%, paste to the left of the tube, duplicate, mirror, move
back to the left, adjust to your liking.

Resize the lighting bug to 75%, mirror, place at the upper right.
Resize the watermelon to 35%, paste at the bottom by the leg of the tube.
Paste star 2 on the hat, duplicate, move below the hat and up a bit, duplicate again,
move to the left and up on the balloon.

Paste sign one on the right below the small lighting bugs, duplicate one of the
stars, resize it to 75%, paste on the wire of the sign.
Resize sucker to 75%, free rotate to the right at 90 degrees, paste below the shoes.
Resize the ice cream to 65%, paste below the watermelon on the right.

Paste star ribbon on the left on the frame.
Paste the sparkles on the top layer at the bottom, duplicate, move to the top,
erase any part on the tube you don't want.

Add any other elements that you would like, make it your own.
If you are going to animate merge with a white background.


Once happy with your tag, crop your tag to make
sure there are no stray edges, merge visible, resize.

Add your copyrights and name.

Take to animation shop, add as many layers as the animation, this one had 15
layers. Edit, Select all, Cope, go to your tag, Edit, Select all, paste into selected frame,
paste on the right. 
I then went back to the animation, select all, resized to 65%, then on the tag edit,
select all, paste into selected frame and pasted on the left.

That's it
Hope you enjoyed doing my tut.


PTU Golden Mermaid


This tut was written June 13th, 2017 for those with a basic knowledge of psp.
I am using the awesome artwork of  Very Many.
Tube is called Mermaid 6
You need a license to use this art work. Please do not use without a license.
 You can find this art at their store  HERE 

I used PSPX...but any of them should work.
PTU Scrap Summer Love by Irish Princess Designs  HERE
This kit is perfect for your Summer fun tagging needs.
You can also find this kit at one of these stores HERE, HERE, HERE
RD Mask 158_4 HERE
Check out the rest of the blog HERE

Filters
AAAFrame-Foto Frame


Font of choice, I used She Always Walks Alone

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800, resize paper 10 to 80%, apply your mask,
delete, merge group.

Resize element 99 to 85%, paste click inside with your magic wand, expand
by 5, paste paper 9, invert, delete, select none.
Paste element 40 below the paper layer of the frame.

Resize your tube to 45%, paste at the bottom of the frame.

Paste element 15 at the bottom below the tube layer, duplicate 3 more times,
arrange how you like.

Paste element 71 behind the tube, adjust how you like.
Resize element 29 to 85%, paste on the right below the sand layers, duplicate,
mirror, move below the paper layer of the frame on the left.

Resize element 22 to 25%, paste on the sand in front of the tube.
Resize element 27 to 25%, paste on the right below the tube.

Paste element 9 on the mask layer, move to the right until the flowers are how
you like them, erase any showing at the bottom below the sand, paste again on
the left, adjust, erase any showing at the bottom again.

Resize element 37 to 40%, paste on the right at the bottom.
Paste element 20 on the paper in the frame, move down some.

Resize element 47 to 40%, paste below the barrel on the right, duplicate, mirror.
Resize element 45 to 30%, paste below the shells on the sand.

Resize element 7 to 45%, paste below the water in the frame.
Resize element 51 to 50%, paste below the dolphins to the left a bit.
Resize element 31 to 35%, paste below the barrel on the right, duplicate, move
to the left more.

Resize element 83 to 20%, paste one by the ocean sign, duplicate, move this
one to the left below the tube.
Paste element 30 on the mask layer, move up and to the right more.
Resize element 16 to 55%, paste on the left above the green vine.
Resize element 6 to 20%, mirror, paste below the ocean sign on the right.

Resize element 70 to 20%, paste on the sand below the tube's hand.

Add any other elements that you would like, make it your own.
If you want to do a Signature tag, don't merge visible just yet.

Signature
Open a new image 600 x 250, fill with #f4eacc.
Close off your tube layer on your tag, copy merge, paste.
Go back to your tag, open your tube, copy and paste.
Copy and paste the ocean sign and resize to 80%, paste on the left.
Add frame of choice. I used AAA Frames, Foto frame width at 2.
Avator
Open a new image 200 x 200 or whatever your group or forum allows,
paste your signature tag, resize to 85%,
take your preset circle, width on 3, color of choice, draw out your circle, then click
inside with your magic wand, expand by 2, adjust your tag how you
want it, then invert, delete, select none.
Or if you like to just make a square then add the AAA frame instead.

Add noise to the circle frame at 100%, merge visible, add your
copyright and name.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.