Wednesday, February 28, 2018

PTU Spring Luck



This tut was written Feb 28th, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of Katharine
The tube is called "Milla"
You need a license to use this art, please do not use without a license.
You can get this tube at PFD HERE

I used PSPX...but any of them should work.
PTU kit Spring Luck by Bits N Bobs  HERE
Check out her blog HERE
Dragonfly Mask0018  HERE
Check out the rest of the blog HERE

Font of choice,  I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 8, apply your mask, delete, merge group, duplicate, 
merge down.

Resize element 75 to 70%, click inside with your magic wand, expand
by 5, paste paper 8, invert, delete, select none.

Resize element 3 to 75%, paste at the bottom, take your Pick tool, take the top
square and hold the shift key and drag down as far as you like, 
then do the other side, duplicate, flip adjust, merge down.

Go to Effects, Distortion, Wind
wind direction 65 to the left, then right, then left again and right again.

Resize your tube to 30%, paste on the grass.

Resize element 16 to 50%, paste behind the tube at up on the right, duplicate,
mirror, move down some on the left behind the tube.
Resize element 72 to 20%, paste at the bottom above the grass layer and to 
cover the straight edge of the legs on the tube.
Resize element 7 to 20%, paste at the bottom by the other slices of fruit element.

Resize element 22 to 25%, paste on the left below the tube, duplicate, mirror.
Resize element 15 to 50%, paste on the right above the tube, erase the stem part,
duplicate, move to the left more over the tube.

Resize element 6 to 50%, paste on the left, duplicate, mirror.
Resize element 57 to 50%, paste at the lower right being on the top layer.
Resize element 13 to 15%, paste to the left of the bear below that layer.

Resize element 92 to 40%, paste on the flower on the left.
Resize element 58 to 15%, paste at the lower left being on the top layer.

Paste element 1 at the top on the frame layer.
Resize element 8 to 40%, paste at the upper right.

Go back to the orange slices element, duplicate twice, move one to the right below
the flowers elements, move the other one behind the hat on the left.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



PTU Peacock Daydream


This tut was written Feb 28th, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of  Katharine
The tube is called "The Queen of Winter"
You need a license to use this tube, do not use without a license.
You can find this tube at PFD store  HERE

I used PSPX...but any of them should work.
PTU Peacock Daydream by Irish Princess Designs  HERE, HERE or HERE
Dragonfly Mask 0030  HERE
Check out the rest of the blog HERE

Font of choice,  I used Aulyars

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 26, apply your mask, delete, merge group.

Resize element 13 to 50%, paste at the bottom, duplicate, mirror.

Resize your tube to 33%, paste on the rocks.

Resize element 31 to 50%, paste on the right below the tube layer.
Resize element 113 to 60%, paste on the right below the peacock.
Resize element 62 to 45%, paste at the bottom of the rocks  about center,
below the tube, duplicate twice, move one to the left and one to the right.

Resize element 64 to 90%, paste on the mask layer and move up some behind
the rocks.
Resize element 38 to 25%, paste below the rock on the left, duplicate, mirror.
Resize element 87 to 65%, paste on the mask layer and move up and to
the right some, duplicate, resize to 75%, move to the left and down.

Resize element 91 to 70%, paste on the castle at the top to the right, duplicate,
move down and to the left more.
Resize element 29 to 40%, paste at the lower left being on the top layer.
Resize element 164 to 25%, paste at the lower left on the tube.
Resize element 15 to 10%, paste on the lower right below the leaves, duplicate,
move up more.
Resize element 7 to 25%, paste on the right below the tube.

Resize element 89 to 25%, paste at the upper left behind the castles.
Resize element 79 to 80%, free rotate to the right at 90 degrees, paste on the 
left above the moon layer, duplicate, mirror.
Resize element 93 to 10%, paste at the lower right by the book.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
 Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.


Tuesday, February 27, 2018

PTU Sweet Beauty



This tut was written Feb 27th, 2018 for those with a basic knowledge of psp.
I am using the awesome artwork of LysIsange.
Tube is called "Sweet Beauty"
She comes in many different color dresses and two hair colors for your tagging fun.
You need a license to use this art work. Please do not use without a license.
 You can find this art Exclusive at S&CO store  HERE 

I used PSPX...but any of them should work.
PTU kit Hello Fairy Spring, Exclusive at S&CO by ChaChaz Creationz  HERE
RD Mask 686  HERE
Check out the rest of the blog HERE

Font of choice,  I used Atyla

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 4, apply your mask, delete, merge group.

Paste element 59 on the left, duplicate, mirror, adjust once your tube is in place
in front of the walls.
Paste element 7 under the rock wall on one side, duplicate, mirror.
Resize element 40 to 55%, paste on one side at the bottom of the wall, duplicate, mirror.

Resize tube to 37%, paste off center to the right a bit.

Paste element 46 behind the wall on the left.
Paste element 61 on the right below the first tree.

Resize element 26 to 50%, paste on the left below the green fern, duplicate, mirror.
Resize element 43 to 50%, paste on the left below the fern,
duplicate, mirror.
Resize element 68 to 40%, paste on the right above the fern layer and cover the 
straight edge of the tube.

Resize element 3 to 30%, mirror, paste on the rock wall on the left.
Resize element 13 to 30%, paste at the bottom being on the top layer to the left.
Paste element 23 on the mask layer on the right.

Paste element 42 below the tree on the left, duplicate, move below the well on 
the right.
Resize element 21 to 35%, paste at the bottom below the frog welcome and the 
little elf.
Resize element 24 to 25%, mirror, paste on the right around the flowers
where you like.
Resize element 58 to 25%, paste on the right on the rock wall.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.



Sunday, February 25, 2018

FTU Clusters Tweets 4 My Love

*CT for BLT Creates*

Cluster Names -: Tweets 4 My Love Clusters
Kit Designer Name -: BLT Creates
Kit name -: Tweets 4 My Love

New kit by BLT Creates - TWEETS 4 MY LOVE
Available in both Full and Tagger Size
You can find it at her Store HERE
or
PFD:  HERE

Fanclub link:

ONLY products that are in her store are available for the Fan Club price.
Find out all the details in her Fan Club

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them



FTU Clusters Fleuriste

*CT for BLT Creates*

Cluster Names -: Fleuriste Clusters
Kit Designer Name -: BLT Creates
Kit name -: Fleuriste

New kit by BLT Creates - FLEURISTE
Available in both Full and Tagger Size
You can find it at her Store HERE
or
PFD:  HERE

Fanclub link:

ONLY products that are in her store are available for the Fan Club price.
Find out all the details in her Fan Club

Click on the Cluster to get full size, then right click and save.

Here are a couple of tags I made with them




FTU Kiss Me I'm Irish


This tut was written Feb 25th, 2018 for those with a basic knowledge of psp.
I am using an awesome tube by BitsNBobs
Tube is called "Kiss Me"
You can purchase the tube HERE

I used PSPX...but any of them should work.
FTU kit Lucky Charm Add On by Bits N Bobs  HERE
Check out her blog HERE
Dragonfly Mask0030  HERE
Check out the rest of the blog HERE
Filter
EyeCandy 4000-Gradient Glow (Optional)
Mura Meister Copies-Encircle

Font of choice,  I used bu Wicked

Drop shadow is usually V-2 H-2 Black, 50, 5, use what you prefer.
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 1, apply your mask, delete, merge group.
Paste paper 3, apply your mask, delete, merge group, merge down.

Paste element 29, click inside with your magic wand, expand by 5, 
paste paper 3, move how you like, invert, delete, keep selected.
Paste your tube without the hat on one side moving out more, delete, mirror your tube,
paste on the other side, delete, select none, merge down.

Duplicate, go to Adjust, Blur, Gaussian blur, number on 4, change the
blend mode to Soft Light, merge down.

Resize the tube with the hat to 50%, paste in the center above the frame.

Resize element 32 to 70%, paste on the mask layer to the right, duplicate, 
mirror, adjust, merge down, duplicate, flip, adjust, merge down.

Resize element 28 to 75%, paste above the tube layer at the bottom, add 
a fat white gradient glow using EyeCandy 4000-Gradient Glow.

Resize element 16 to 40%, paste at the lower right above the wordart.
Resize element 17 to 45%, paste on the left on the wordart.
Resize element 25 to 40%, mirror, paste on the left of the wordart at the bottom.

Resize element 26 to 40%, paste on the mask layer, apply Mura Meister
Copies-Encircle, first number on 20.

Resize element 11 to 50%, paste at the bottom below the tube to the left, 
adjust behind the hat, duplicate, mirror.
Resize element  2 to 25%, paste on the frame on one side about center,
duplicate, mirror.

Add any other elements that you would like, make it your own.

Once happy with your tag, close off any background, crop your tag to make
sure there are no stray edges, merge visible, resize first.
Add your copyrights and name.

That's it
Hope you enjoyed doing my tut.